-Automatic load/unload from vertical bore belt conveyor with escapement.

-Pneumatic walking beam with THK rods and bearings for stator transport in bore vertical position through machine.

-In Station One, the stator is moved to a horizontal position and the first terminal is inserted. The stator is then rotated and the second terminal is inserted. This process is repeated in Station Two.

-Centralized push button operator control panel.

-Allen-Bradley Data Table Access Module for machine parameter data entry with two (2) line, 16 character display including fault coded diagnostics and parts counter.

-Metric construction.

-12mm plug-in proximity switches.

-Modular guarding with all electrical interlocks and extruded aluminum frame with polycarbonate inserts.

-Capable of a six (6) second cycle time to insert four (4) terminals.

-Manual adjustment for different radial positions to provide fast changeover.

-Terminal presence confirmation and reject output signal.

-Low material, malfunction and cycle interrupt lights.

-No change over for different stack heights.

Terminal placing heads for displacement style terminals supplied by customer or as an option by Globe.

Tooling for lifting the stator from the walking beam or pallet. Tooling plate to guide the stator during terminal placement.

220/380/440/460/480 Volts, 3-phase,50/60 Hz, 5 KVA.

A 0.5 in. (13 mm), 100 psi (6.8 atm) capacity air line should supply the machine. A supplied pressure regulator will reduce pressure to 80 psi (5.4 atm) for machine operation.

-WIDTH: 1.5 M (59 inches)

-LENGTH: 1.5 M (59 inches)

-HEIGHT: 2.3 M (91 inches)

1,000 kilograms (2,200 pounds)

40º Fahrenheit (4º Centigrade) to 104º Fahrenheit (40º Centigrade).

-Outside Dimension Min 38.00 mm ( 1.50 inches) square Max 120.00 mm ( 4.70 inches) square

-Bore Diameter Min 35.00 mm ( 1.38 inches) Max 76.00 mm ( 3.00 inches)

-Stack Height Min 17.00 mm ( 0.57 inch) Max 65.00 mm ( 2.56 inches)

-Wire Size Range Min 0.15 mm (34AWG) Max 1.02 mm (18AWG)