-Belt Automatic load/unload from vertical bore belt conveyor.
-Pneumatic walking beam with THK rods and bearings for stator transport in bore vertical position through machine.
-Belt Stator to be tested is isolated via the walking beam.
-Pallet Automatic load/unload stator bore vertical from pallet.
-Pallet Elevator to lift the stator from the pallet to the test head and lower the stator back to the pallet.
-Centralized push button operator control panel.
-Allen-Bradley Data Table Access Module for machine parameter data entry with two (2) line, 16 character display including fault coded diagnostics and parts counter.
-Allen-Bradley SLC-500 Programmable Controller.
-Metric construction.
-12mm plug-in proximity switches.
-Modular guarding with all electrical interlocks and extruded aluminum frame with polycarbonate inserts.

-Four (4) stations consisting of the following:*Resistance/Surge.
*Hi-pot.
*Unused
-Fisher Data Products F-5 Series control panel with isolated I/O package including a Pentium processor, color touch screen, 1.0 GB hard drive, a 3.5” floppy disk drive, built in modem and ink jet data printer.
-Free standing test panel.
Test panel signals rejected stator for manual removal.
-50 or 60 (Specify) hertz application.
OR
-Operator interactive 265mm (10.4in.) VGA color touch screen providing a graphical user interface, displayed in a windows environment.

-IC-2000 Industrial Computer open architecture control system incorporating ‘off-the-shelf’ scaleable hardware including:
*Pentium micro processor.
*ISA industrial grade Bus.
*Flash Drive for program storage (non-rotating).
*3.5in., 144Mbyte floppy disk drive for part parameter and production data backup.
*Ethernet 10-Based-2 coaxial networking.
*Centronics printer port.
*QNX real-time operating system providing a windowing environment, displaying and including parameter storage for up to 1000 part configurations, operator selectable and graphically displayed production data, extended diagnostics through complete I/O status examination and fault prompting, setup utilities viewing, and single keying of multiple languages.
-Infrared temperature measurement.
OR
-Ambient temperature compensation in control panel.
-Line voltage stabilization.

-Test panel is capable of the following tests functions:
*Hi-pot (0-3000 VAC).
*Surge Differential (0-1000 VDC Pk).
*Resistance (16 Ranges).
*Resistance Differential

220/380/440/460/480 Volts, 3-phase, 50/60 Hz, 5 KVA.

A 0.5 in. (13 mm), 100 psi (6.8 atm) capacity air line should supply the machine. A supplied pressure regulator will reduce pressure to 80 psi (5.4 atm) for machine operation.

-Width: 1.5 M (59 in.)

-Length: 1.5 M (59 in.)

-Height: 2.3 M (91 in.)

-Weight (approximate) 1,000 kilograms (2,200 pounds)

40 degrees Fahrenheit (4 degrees Centigrade) to 104 degrees Fahrenheit (40 degrees Centigrade).

-Outside Dimension Min 38 mm (1.5 in.) square Max 120 mm (4.7 in.) square

-Bore Diameter Min 35 mm (1.38 in.) Max 76 mm (3.0 in.)

-Stack Height Min 17 mm (0.57 in.) Max 65 mm (2.56 in.)

-Wire Size Range Min 0.15 mm (34AWG) Max 1.02 mm (18AWG)

Complete Set of Quick Change Tooling to accommodate one (1) stator configuration including a Fisher Data Products test head. ​