-Automatic load/unload.

-Centralized push button operator control panel.

-Allen-Bradley Data Table Access Module for machine parameter data entry with two (2) line, 16 character display including fault coded diagnostics and parts counter.

-Allen-Bradley SLC-500 Programmable Controller.

-Metric construction.

-12mm plug-in proximity switches.

-Modular guarding with all electrical interlocks and extruded aluminum frame with polycarbonate inserts. -Low material, malfunction, and cycle interrupt lights.

-Terminal board presence check and reject output signal.

-No stack height change required.

-BPMA-8000. Machine with one placing station to place one plastic end board on the stator.

-BPMA-8200. Machine with two placing stations to place two plastic end boards on the stator.

-Vibratory bowl or bowls to accommodate each plastic end board.

-Orientation and placing tooling for each placing station.

-Lift tooling for each stator lamination configuration.

Rotating mechanism for placing the bottom board in station number 1 in order to achieve a cycle time of less than 6 seconds.

A 0.5 inch (13 mm), 100 psi (6.8 atm) capacity air line should supply the machine. A supplied pressure regulator will reduce pressure to 80 psi (5.4 atm) for machine operation.

-WIDTH: 2160 mm (85 inches)

-HEIGHT: 2210 mm (87 inches)

-LENGTH: 2795 mm (110 inches)

-WEIGHT (approximate for BPMA-8200) 1,365 kilograms (3000 pounds)

40º Fahrenheit (4º Centigrade) to 104 º Fahrenheit (40º Centigrade).

-Outside Dimension Min 38 mm (1.50 inches) square Max 120 mm (4.7 inches) square

-Bore Diameter Min 35 mm (1.38 inches) Max 76 mm (3.0 inches)

-Stack Height Min 17 mm (0.57 inch) Max 76 mm (3.0 inches)