ASLR-8600 Armature Core Assembly Machine





The Globe ASLR-8600 armature core assembly machine automatically inserts armature shafts into the preselected armature stacks of interlocked (dimpled) laminations for sub-fractional and fractional horsepower electric motors. As with all Globe “Series 8000” machines, the ASLR-8600 can be used as a stand-alone machine, in a work-cell or easily moved up to any style material handling system for use in a fully automated armature production line.







Standard Features



-Load with automatic core unload.

-Automatic shaft load. Shaft press using ball screw with electric servomotor drive for higher efficiency, less maintenance and clean operating area.

-No hydraulics required.

-Controllable shaft press pressure range up to 24,000 lbs. (10,886 kg).

-No tooling changes are required for changes in stack height.

-Globe’s exclusive IC-2000 TM Intelligent Control System.

-Six (6) Station turret for lamination stack loading, shaft loading, shaft press and unloading. Metric construction.

-ISO valves and cylinders where possible.

-12 mm plug-in proximity switches for ease of maintenance.

-Modular guard with electric interlocks and extruded aluminum frame with polycarbonate inserts. ​



Options



Automatic load of stacks from conveyor or pallet.



Productivity



Cycle time will depend on the armature configuration. Typically, however, with quality parts the ASLR-8600 produces 600 parts per hour.



Controls



A conveniently located interactive touch screen operator control panel provides machine diagnostics, 99 part parameter storage and a printer port to print parameters and last eight hours of production data for five functions.



Armature Capacities



Shaft Length - Minimum 76.0 mm (3.000 inches), Maximum 254.0 mm (10.000 inches)

Shaft Diameter - Minimum 3.2 mm (0.125 inch), Maximum 15.9 mm (.625 inch)

Stack Diameter - Minimum 25.4 mm (1.000 inch), Maximum 76.0 mm (3.000 inches)

Stack Length - Minimum 12.7 mm (0.500 inch), Maximum 76.0 mm (3.000 inches)



Machine Specifications



Electrical requirements



Standard electrical requirements are: 08/240/380/415/480/575 volts, 3 phase, 50/60 HERTZ



pneumatic requirements



A one-half inch, 100 PSI (6.8 atm) capacity air line should supply the machine. A pressure regulator will reduce the pressure to 80 PSI (5.4 atm) for machine operation.



approximate machine dimensions



WIDTH: 1549 mm (61 inches)

HEIGHT: 2540 mm (100 inches)

LENGTH: 1981 mm (78 inches)



machine weight



1134 kilograms (2500 pounds)